                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:1441555
28 mm Dual cannon turret by Hiduken125 is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

This is a 28mm dual cannon turret top compatible with my 28mm retribution turret base (found here https://www.thingiverse.com/thing:1433038) and with a future release of mine for more fortifications as well as many actual 40k fortifications. This model has options for both laser cannons and normal cannons as primary armaments.
For a complete print print out the following
-1x base plate
-2x side walls
-2x front-back walls
-1x turret rotation part 1
-1x either turret rotation part 1 cannons or turret rotation part 1 lasercannons
Minor edits to the base plate and side walls for better fit anyone with older downloads it will still work but might need minor filing in the connection pieces due to heat shrink but will still work just fine.

# Print Settings

Rafts: Doesn't Matter
Supports: No
Resolution: .2-.1
Infill: 10-20%

Notes: 
Active cooling recommended. Side walls should be printed on .16 or lower for better quality.

# Post-Printing

## Prep and Assembly

Standard fill and sanding for cleaning up the looks. 
-Glue turret rotation pt 1 and 2 together with super glue roughing up contact surfaces will ensure better adhesion. 
-The tabs that connect the parts together and rotate within each other will probably also need sanding to ensure it fits properly.
-I reccomend dry fitting all parts prior to any gluing.
Assembly
1. Glue both front and back piece to one of the side walls. 
2. Then place the rotation part in its place on the side piece you have glued the front and back pieces to. 
3. Then glue the other side piece to the front and back pieces ensure the rotation piece properly rotates.
4. Glue the base piece in place to complete assembly.